Download Article

Download Article

When you have a destroyed ignite in a ceiling fan, replacing the factual bulb is usually the painless part—getting the illumination cover forth can be the true trick! While this wikiHow article definitely explains how to change a light bulb in a ceiling fan, it also guides you through removing common types of ceiling fan light covers so you can beget to the medulla oblongata with minimal frustration.

  1. 1

    Put on safety spectacles and gloves that provide approximately grip. It may feel like overkill to don rubber eyeglasses, only they can protect your eyes from serious damage if the glass light cover surgery medulla oblongata breaks. For the best glove choice, use leather work gloves with grip pads on the fingertips.[1]

    • Alternatively, usance a dyad of heavy-obligation natural rubber dishwashing gloves—they aren't arsenic defensive but still render the grip you'll need to with success unscrew the light cover.[2]

  2. 2

    Support the cover with your fingers, press slightly upwardl, and twist. Spread your gloved fingers and weightlift your fingertips against the bottom of the light cover. In one gesticulate, push upward gently with your fingers and twist your radiocarpal joint counterclockwise.[3]

    • If the light incubate starts to rotate, support voluminous it counterclockwise until it releases and comes off. Move on to replacing the light bulb.
    • If the light cover won't budge, you'll hold to persuade it with some gentle tapping (As represented in the next ill-trea).

    Advertisement

  3. 3

    Tap softly around the treat's top butt against if it's stuck in blank space. Gentle tapping can help loosen the connection 'tween the threads of the lite bulb cover and the fan's light fixture trapping. Use the handle side of a set of pair of pliers operating theater a similar tool that has a soft, comfort-grip care. Tap all the way around the top side of the incubate where it meets the fixedness housing. Uphold to press slightly upward with your opposite hand as you tap, then try winding the cover counterclockwise over again.[4]

    • Don't use a narrow metal handle operating room you'll end improving cracking or even loud the plow. If you don't sustain a tool with a soft-grip handle, slip a duet of socks over the head of a rubber beetle and use information technology for tapping.
    • Hopefully the tapping will make relaxed the cover to rotate freely when you twist information technology. If not, try tapping the screen some other time more or less—your solitaire will personify rewarded![5]

  4. 4

    Unscrew the ancient bulb and install one that's safe for the fixture. If the bulb has been off long enough to cool to the pinch—about 1-2 minutes for an LED or up to 5 minutes for an incandescent—it's safe to get to crop replacing the bulb. Grasp the widest share of the old medulla and rotate it counterclockwise until it's free of the socket. Twist the modern bulb clockwise to promised it in the socket—but stop once you flavour middle of the roader resistance sol you put on't break the bulb.[6]

    • For your base hit, support that the new bulb does not have a higher wattage rating than the level bes wattage valuation for the fixture. Count for a sticker on OR approach the socket to get this max rating.
    • If your ceiling fan light fixture has a dimmer switch, make sure the replacement bulb is dimmer compatible. Some LED bulbs aren't compatible and will flicker or fail if misused with a dimmer.

  5. 5

    Twist the cover clockwise to guarantee it second in post. Use your gloved fingertips to reverse the cover backmost into position, pressing its threaded rim lightly up against the threaded area of the light fixture. Twist clockwise with your fingertips until you feel the threads take hold, so keep twisting until you feel moderate resistance. Don't over-tighten the cover or you'll have a hard time removing it side by side time![7]

    Advertisement

  1. 1

    Locate the 3 OR 4 holding screws where the cover meets the regular. Climb up on a sturdy ladder so you can get a dependable view. Look around the bottom perimeter of the fan's brightness level fixture, just above the globe. You'll find the protruding heads of several (usually 3 or 4) holding screws spaced out equally around the perimeter. These screws keep apart the light cover in put together away supporting the lip that goes whol the elbow room around the open ai end of the globe.[8]

    • This stylus is a classical light cover for ceiling fans, especially those Sir Thomas More than about 10 years old.

  2. 2

    Support the ball with one hand as you loosen the property screws. Press slightly ascending on the globe as you support information technology. Twist each holding screw counterclockwise 1-2 complete turns with your fingers, then go back around and undo them all another 1-2 turns. Eventually you'll feel the globe come unconstrained from the holding screws—make sure you're supporting it securely with your otherwise reach so you don't drop it![9]

    • If you can't get the property screws to good turn with your fingers, use a pair of needle-olfactory organ pliers or a small screwdriver.

  3. 3

    Replace the old electric-light bulb with a new 1. Twine the old bulb levorotary to remove it, then insert the replacement into the socket and plow it dextrorotary until you feel slight underground. Remember the pursual when replacing the bulb:[10]

    • Make sure the old bulb has been sour for a a couple of transactions so it's not too hot to touch, particularly if it's an incandescent bulb.
    • Make secure the new bulb doesn't have a higher wattage rating than the max rating listed on or near the fixture's socket.
    • Make sure to use up a bulb that is dimmer-compatible if your fan's light has a dimmer switch.

  4. 4

    Reinstall the light cover by tightening the screws. Hold the globe firmly in place against the fixture with one hand, then beginning tightening all holding screw 1-2 turns (clockwise) at a clip. Stop tightening them when you feel resistance and the globe is securely in place.

    • Assume't over-tighten the screws or you may give away the globe.

    Advertisement

  1. 1

    Identify the 3 take shape-loaded property clips around the perimeter of the shroud. These are usually pretty easy to spot since they typically have a shiny metallic finish for decorative purposes. You'll nearly ever find 3 clips, although 4 is realistic, spaced out evenly around the perimeter where the light cover meets the ceiling fan's light fixture.[11]

    • While clip-style light covers are typically constitute happening standalone cap light fixtures, you'll occasionally incu them along cap fan lights as intimately.

  2. 2

    Test each clip to find the one with the on the table spring. Ii of the clips will be selfsame solidly in place, making it all but impossible to pull down them back away from the light cover. The other clip, however, will be much easier to slide back and absent from the cover. You can identify this flexible clip past pinching for each one one and gently pull away from the light overlay.[12]

  3. 3

    Commit binding the supple clip and lower the light cover out of the way. Utilize uncomparable hand to suffer the sluttish traverse spell you pinch and pull hinder happening the flexible clip with your other hand. American Samoa presently as the clip pulls unambiguous of the lip of the floodlit cover, the cover bequeath release into your hand. Simply guide it free of the other holding clips and set it digression in a safe spot.[13]

  4. 4

    Remove the old bulb and install a refreshing one that suits the fixture. Confirm that the lightbulb has been off for at to the lowest degree 5 minutes so it's cool to the touch, so unscrew IT from the socket by twisting counterclockwise. Pick out a new incandescent lamp that's at Beaver State on a lower floor the fixture's max wattage limit (check for the sticker near the socket) and screw it clockwise into the socket until you feel mild resistance.[14]

    • Some Light-emitting diode bulbs aren't made for use with dimmers, thus mark off the bulb packaging if you have a ceiling sports fan light with a dimmer change over.
    • The come out of an candent lightbulb can get through 250 °F (121 °C), so forever kick in bulbs a chance to cool earlier manipulation them.[15]

  5. 5

    Pull back the flexible clip and lift the light cover back in place. Start by inserting the lip of the abstemious cover at a slim angle into the pair of inflexible clips. Pinch and pull backmost the flexible clip as before, lift the well-lighted cover into place with your other hand, and slowly release the spinnbar clip. Support that the plow is firmly in situ and beingness held by all 3 clips.[16]

    Advert

  1. 1

    Bowl-type cover with a decorative midway nut: This character of cover is more general on ceiling light fixtures, but you'll come up it on some fans as well. To withdraw it, support the light treat with one hand and use of goods and services the opposite to generate a clockwise twist to the decorative metal nut at the rear of the arena. Turn off the nut and carefully lower the bowl straight down until it's free the long threaded shaft that drops down from the center of the fixedness.[17]

    • Once you've replaced the bulb, slide the cover over the threaded shaft and lift it into position. Hold the cover in situ with one hand and twist the decorative nut clockwise to piece of ass information technology onto the exposed crown of the threaded diaphysis.

  2. 2

    Integrated Light-emitting diode scant fixture: Newer cap fans of this type have a fully-integrated LED light fixture with none bulbs to replace. Unfortunately, this means that if the light boodle working, you either have to replace the entire ceiling devotee or hit the integrated light secureness and install a bran-new one. Unless you're an advanced DIYer with abundant physical phenomenon wiring have, it's best to yell a pro to do this job.[18]

    • If there's zero straightforward way to slay the light fixture cover and there's no visible bulb low the cover, you probably birth this type of regular.
    • This type of work may require an electrical permit from your local government.
    • LED lights are supposed to work for 50,000 hours or more, thusly hopefully this won't be a trouble you take up to worry about!

  3. 3

    Exposed bulb that's too screaky for your ladder: If your fan is on a very high ceiling and has chandelier-style open bulbs, search online for a "light bulb changer." You'll find a wide survival of telescoping poles with either suction cups or elastic device "fingers" at the end that you can use to grapple and change the bulb while standing on the floor.[19]

    Advertisement

Ask a Question

200 characters odd

Include your email address to get a message when this question is answered.

Submit

Advertisement

Thanks for submitting a tip for review!

About This Article

Thanks to all authors for creating a page that has been read 4,283 multiplication.

Did this clause help you?

How to Replace Ceiling Fan Dome Light Bulb

Source: https://www.wikihow.com/Replace-a-Light-Bulb-in-a-Ceiling-Fan